We specialize in the research and development, production, and sales of various standard, non-standard, and fasteners such as high-quality and high-precision bolts, screws, nuts, washers, etc.
Fasteners have diverse materials and complete specifications, supporting non-standard customization.
Consulting service hotline:13306482520
Email:13306482520@163.com
| Thread specification D | M3 | M4 | M5 | M6 | M8 | M10 | M10 | M12 | M12 | |
| P | Pitch | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1 | 1.75 | 1..5 |
| d | Nominal | 5 | 6 | 7 | 9 | 11 | 13 | 13 | 15 | 15 |
| Maximum value | 4.97 | 5.97 | 6.97 | 8.97 | 10.97 | 12.97 | 12.97 | 14.97 | 14.97 | |
| Minimum value | 4.9 | 5.9 | 6.9 | 8.9 | 10.9 | 12.9 | 12.9 | 14.9 | 14.9 | |
| d1 | Minimum value=Nominal (H12) | 4 | 4.8 | 5.6 | 7.5 | 9.2 | 11 | 11 | 13 | 13 |
| Maximum value | 4.12 | 4.92 | 5.72 | 7.65 | 9.35 | 11.18 | 11.18 | 13.18 | 13.18 | |
| dk | Maximum value | 8 | 9 | 10 | 12 | 14 | 16 | 16 | 18 | 18 |
| k | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
| r | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
| d0 | Minimum value=Nominal | 5 | 6 | 7 | 9 | 11 | 13 | 13 | 15 | 15 |
| Maximum value | 5.15 | 6.15 | 7.15 | 9.15 | 11.15 | 13.15 | 13.15 | 15.15 | 15.15 | |
| h1 | Refer to | 5.8 | 7.5 | 9.3 | 11 | 12.3 | 15 | 15 | 17.5 | 17.5 |
| Recommended riveting thickness h | - | - | - | - | - | - | - | - | - | |
| L1 (Refer to) | - | - | - | - | - | - | - | - | - | |
| Thousand pieces of steel weight≈kg | - | - | - | - | - | - | - | - | - | |
| Thread b | - | - | - | - | - | - | - | - | - | |
① , b=(1.25~1.5) D A - Determined by the manufacturer ② This standard is not equivalent to the Italian national standard UNI 9202:1988 "Countersunk Internal Thread Tubular Rivets". UNI 9202 does not provide permission to produce patterns, r, l1 dimensions, and Appendix A on the bearing surface and/or the circumferential surface. The coarse thread specifications, d, dk, d0, k, and L given in this standard are consistent with UNI 9202. ③ It is allowed to create patterns on the supporting surface and the (or) d circumferential surface, and the type and size of the patterns are determined by the manufacturer. ④ , L is the maximum value ⑤ The technical conditions shall comply with the provisions of GB/T 17880.6. | ||||||||||
E-Mail：13306482520@163.com
Phone：133-0648-2520
Address：008, Zone 9, Wanxing International Hardware City, Heilongjiang North Road, Chengyang District, Qingdao City, Shandong Province
Copyright © 2023 QINGDAO JEEKUU HARDWARE PRODUCTS CO., LTD All Rights Reserved. Powered by Hicheng SITEMAP
