We specialize in the research and development, production, and sales of various standard, non-standard, and fasteners such as high-quality and high-precision bolts, screws, nuts, washers, etc.
Fasteners have diverse materials and complete specifications, supporting non-standard customization.
Consulting service hotline:13306482520
Email:13306482520@163.com
| Nominal diameter ① | 0.6 | 0.8 | 1 | 1.2 | 1.6 | 2 | 2.5 | 3.2 | ||
| d | Maximum value | 0.5 | 0.7 | 0.9 | 1 | 1.4 | 1.8 | 2.3 | 2.9 | |
| Minimum value | 0.4 | 0.6 | 0.8 | 0.9 | 1.3 | 1.7 | 2.1 | 2.7 | ||
| α | Maximum value | 1.6 | 1.6 | 1.6 | 2.5 | 2.5 | 2.5 | 2.5 | 3.2 | |
| Minimum value | 0.8 | 0.8 | 0.8 | 1.25 | 1.25 | 1.25 | 1.25 | 1.6 | ||
| b | ≈ | 2 | 2.4 | 3 | 3 | 3.2 | 4 | 5 | 6.4 | |
| c | Maximum value | 1 | 1.4 | 1.8 | 2 | 2.8 | 3.6 | 4.6 | 5.8 | |
| Minimum value | 0.9 | 1.2 | 1.6 | 1.7 | 2.4 | 3.2 | 4 | 5.1 | ||
| Applicable bolt diameter | ≤ 2.5 | ＞2.5, ≤ 3.5 | ＞3.5, ≤ 4.5 | ＞4.5, ≤ 5.5 | ＞5.5, ≤ 7 | ＞7, ≤ 9 | ＞9, ≤ 11 | ＞11, ≤ 14 | ||
| Applicable U-pin diameter | ≤ 2 | ＞2, ≤ 3 | ＞3, ≤ 4 | ＞4, ≤ 5 | ＞5, ≤ 6 | ＞6, ≤ 8 | ＞8, ≤ 9 | ＞9, ≤ 12 | ||
| Thousand pieces of steel weight≈kg | - | - | - | - | - | - | - | - | ||
| Nominal diameter ① | 4 | 5 | 6.3 | 8 | 10 | 13 | 16 | 20 | ||
| d | Maximum value | 3.7 | 4.6 | 5.9 | 7.5 | 9.5 | 12.4 | 15.4 | 19.3 | |
| Minimum value | 3.5 | 4.4 | 5.7 | 7.3 | 9.3 | 12.1 | 15.1 | 19 | ||
| α | Maximum value | 4 | 4 | 4 | 4 | 6.3 | 6.3 | 6.3 | 6.3 | |
| Minimum value | 2 | 2 | 2 | 2 | 3.15 | 3.15 | 3.15 | 3.15 | ||
| b | ≈ | 8 | 10 | 12.6 | 16 | 20 | 26 | 32 | 40 | |
| c | Maximum value | 7.4 | 9.2 | 11.8 | 15 | 19 | 24.8 | 30.8 | 38.5 | |
| Minimum value | 6.5 | 8 | 10.3 | 13.1 | 16.6 | 21.7 | 27 | 33.8 | ||
| Applicable bolt diameter | ＞14, ≤ 20 | ＞20, ≤ 27 | ＞27, ≤ 39 | ＞39, ≤ 56 | ＞56, ≤ 80 | ＞80, ≤ 120 | ＞120, ≤ 170 | ＞170 | ||
| Applicable U-pin diameter | ＞12, ≤ 17 | ＞17, ≤ 23 | ＞23, ≤ 29 | ＞29, ≤ 44 | ＞44, ≤ 69 | ＞69, ≤ 110 | ＞110, ≤ 160 | ＞160 | ||
| Thousand pieces of steel weight≈kg | - | - | - | - | - | - | - | - | ||
| ①, The nominal diameter is equal to the diameter of the split pin hole. The recommended tolerance for pin hole diameter is: Nominal diameter ≤ 1.2: H13; Nominal diameter>1.2: H14 According to the agreement between the supply and demand parties, it is allowed to use split pins with nominal specifications of 3, 6, and 12mm. | ||||||||||
E-Mail：13306482520@163.com
Phone：133-0648-2520
Address：008, Zone 9, Wanxing International Hardware City, Heilongjiang North Road, Chengyang District, Qingdao City, Shandong Province
Copyright © 2023 QINGDAO JEEKUU HARDWARE PRODUCTS CO., LTD All Rights Reserved. Powered by Hicheng SITEMAP
